| Specification | Details |
|---|---|
| Product Name | NovaStar DSP1000 Pro |
| Product Type | All-in-One LED Controller |
| Maximum Load Capacity | 6.5 Million Pixels |
| Maximum Output Resolution | 10,240 × 8,192 Pixels |
| Video Input Resolution | Up to 4K × 2K @ 60Hz |
| Ethernet Outputs | 10 × Gigabit Ethernet |
| Fiber Outputs | 2 × Optical Fiber |
| HDMI Input | 1 × HDMI 2.0 (IN & LOOP), 2 × HDMI 1.3 |
| SDI Input | 1 × 3G-SDI (IN & LOOP) |
| USB | 1 × USB 3.0 |
| HDMI Output | 1 × HDMI 1.3 (Monitor) |
| 3D Support | 1 × 3D Connector |
| Display Layers | 6 Independent Layers |
| Image Scaling | Stepless Scaling |
| Low Latency | Supported |
| Calibration | Pixel-Level Brightness & Chroma Calibration |
| Working Modes | Video Controller, Fiber Converter, ByPass |
| Power Supply | AC 100–240V, 50/60Hz |
| Power Consumption | 43 W |
| Operating Temperature | 0°C to +50°C |
| Operating Humidity | 5%–85% RH (Non-condensing) |
| Storage Temperature | -10°C to +60°C |
| Storage Humidity | 5%–95% RH (Non-condensing) |
| Dimensions | 482.6 × 302.2 × 50.1 mm |
| Net Weight | 3.9 kg |
| Total Weight | 6.5 kg |
| Noise Level | 45 dB(A) |
NovaStar DSP1000 Pro All-in-One LED Controller
Key Features:
- Supports up to 6.5 million pixels
- Maximum output resolution: 10,240 × 8,192 pixels
- All-in-one LED video processor and controller
- 10 × Gigabit Ethernet outputs
- 2 × Optical Fiber outputs
- HDMI 2.0, HDMI 1.3 and 3G-SDI inputs
- USB 3.0 media playback
- Supports 4K×2K@60Hz video input
- 6 independent display layers
- Stepless image scaling
- Low latency processing
- Pixel-level brightness & chroma calibration
- HDMI monitor output
- Supports Video Controller, Fiber Converter & ByPass modes
- Supports third-party 3D emitter connection
Hasan Mahmud –
We’ve been using the NovaStar DSP1000 Pro All-in-One LED Controller for a large-format LED display in our showroom, and it has been incredibly reliable. The image quality is crisp, transitions are smooth, and the controller handles high-resolution content without any noticeable delay.
What impressed us most is its stable performance during long operating hours. Even after running all day, it continues to deliver consistent output without overheating or signal interruptions.
Tareq Hossain –
I purchased the NovaStar DSP1000 Pro for an LED video wall installation, and the setup was much easier than I expected. The interface is intuitive, and integrating it with our existing NovaStar system was straightforward. Everything worked perfectly after the initial configuration.
Overall, it’s a dependable all-in-one controller that makes LED display management simple and efficient.